Results 1 to 10 of 103

Thread: First Timer Build TLA-1R

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    Ben I had a thought, the PBG bridge saddle screws look a bit longer, see if the thread is the same and put the screws into the Wilkinson bridge and see if you can get around the 314-317mm range to 12th fret - high and low E respectively
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  2. #2
    Member Bungee's Avatar
    Join Date
    Dec 2015
    Location
    Sydney
    Posts
    80
    Quote Originally Posted by wokkaboy View Post
    Ben I had a thought, the PBG bridge saddle screws look a bit longer, see if the thread is the same and put the screws into the Wilkinson bridge and see if you can get around the 314-317mm range to 12th fret - high and low E respectively
    Ah, good idea. I will give it a go.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •