Quote Originally Posted by wokkaboy View Post
nice fix Soundguy, so was the bridge flush with the bottom of the pickguard ? That colour on the ash is making that grain pop nicely.
With any luck hopefully the bridge plate hides the dowels anyway
Thanks Wok, depending on how far I move the bridge the plate does hide the dowels, or at very worst only a mm is exposed, but I doubt anyone (else)would ever notice.
And yeah the bridge was nice and flush, when I drilled the screw holes I didnt check the back, before the base of the bridge was hard up against the front edge of the route, so the tremelo could only pitch down.