I don't think that pun was intended but it's pretty funny!Originally Posted by Tindrrel
I don't think that pun was intended but it's pretty funny!
Pun? I don't mind a pun here and there. I think I've missed that one though.
- Sam
IB-5 - was finished, considering re-finishing body
IB-6S - done.
JR-1M - dressing frets and electronics build
ST-1 - still wondering how to install a tremelo
Telebass - non-PBG from parts buiild - painting body
Sam, Pest is talking about filling gaps and spraying, you dropped a pun and didn't intend to - nice one
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Hanging on a swivel so I can turn it to spray each side.
This shot is after the first tack coat of primer. It has had a few more coats since and is more opaque now.
- Sam
IB-5 - was finished, considering re-finishing body
IB-6S - done.
JR-1M - dressing frets and electronics build
ST-1 - still wondering how to install a tremelo
Telebass - non-PBG from parts buiild - painting body
nice progress, love these double cuts
Stan's LP Build for my Sister: http://www.buildyourownguitar.com.au...ead.php?t=3146
Benson Pickup Strat mod: http://www.buildyourownguitar.com.au...ead.php?t=5229
Epiphone LP headstock fix: http://www.buildyourownguitar.com.au...ead.php?t=3410
Martin Backpacker Repair: http://www.buildyourownguitar.com.au...?t=5038&page=3
'57 Harmony Jazz guitar project: http://www.buildyourownguitar.com.au...ead.php?t=2972
Yep Wokka got my pun. It was about the primer how it can be used to fill the pores of the wood
Guess I missed it because that's not what I thought I was spraying the primer for, already did the grainfiller step.
- Sam
IB-5 - was finished, considering re-finishing body
IB-6S - done.
JR-1M - dressing frets and electronics build
ST-1 - still wondering how to install a tremelo
Telebass - non-PBG from parts buiild - painting body
So after two days of spray and wait and repeat (that earlier shot was a couple of days ago) I have 5 coats of primer and a nearly empty rattle can.
Had a horrible feeling I left a run in it after the last coat, which I'll have to check for tomorrow. If I'm lucky there'll be enough in the can to sand and fix it if so.
Otherwise, I'm about ready to let it be. Then in a few days, and then some - start with the top coat.
- Sam
IB-5 - was finished, considering re-finishing body
IB-6S - done.
JR-1M - dressing frets and electronics build
ST-1 - still wondering how to install a tremelo
Telebass - non-PBG from parts buiild - painting body
looking good Sam, love the spray booth too !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
For whatever reason, there is a shower stall in the laundry shed out in the yard. The booth is a couple of cardboard boxes stacked in the stall. The hanger is a coat hanger from a plank across the top of the stall and with a swivel joint fitted. The shed has good ventilation - I leave the door open and open the slatted windows. Primitive, but it works.
- Sam
IB-5 - was finished, considering re-finishing body
IB-6S - done.
JR-1M - dressing frets and electronics build
ST-1 - still wondering how to install a tremelo
Telebass - non-PBG from parts buiild - painting body
Posting Permissions
![[url=https://www.facebook.com/kellysgutiars]](image.php?u=1285&type=sigpic&dateline=1444110346)
Reply With Quote