The other thought I had is when you have the neck in and bog that crack, run some filler around the neck join.
(Assuming you are going to paint a solid colour)
That way you will get a nice uniform look, just like a bought one
The other thought I had is when you have the neck in and bog that crack, run some filler around the neck join.
(Assuming you are going to paint a solid colour)
That way you will get a nice uniform look, just like a bought one
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
Spraying white. The plan was to do the filler, then set the neck, then do filler around the join, then sealer/primer, then the white top coat.Originally Posted by dingobass
The other thought I had is when you have the neck in and bog that crack, run some filler around the neck join.
(Assuming you are going to paint a solid colour)
That way you will get a nice uniform look, just like a bought one
- Sam
IB-5 - was finished, considering re-finishing body
IB-6S - done.
JR-1M - dressing frets and electronics build
ST-1 - still wondering how to install a tremelo
Telebass - non-PBG from parts buiild - painting body
Posting Permissions
Reply With Quote