You guys are life savers! I'd all but given up on the black binding, resigning myself to leaving it with a few yellow imperfections. Has anyone had any experience with using spray cans of polyurethane as a finish?
You guys are life savers! I'd all but given up on the black binding, resigning myself to leaving it with a few yellow imperfections. Has anyone had any experience with using spray cans of polyurethane as a finish?
Hey mate, posted some advice on my build diary for you. As for poly clears from a can, I used Cabothane satin for my MB-1 (Wasp) build, and it worked a treat. Depending what you're looking for they have a satin (obviously, since I used it) and a gloss too. Both can be picked up at the big green shed for a relatively small fee, and you can get about three coats per can, so pretty good value.Originally Posted by lukemichael
"Sometimes you want to give up the guitar, you'll hate the guitar. But if you stick with it, you're gonna be rewarded"
- Jimi Hendrix
My Builds:
#1: Non-PBG SG - "Purple Flame" (Getting Wired)
#2: PBG MB-1 - "The Wasp" (Getting Wired)
#3: PBG IB-1 - "V-Bay at Noon" (90% Done)
#4: PBG SG-1F - (Getting Cleared)
My Future Builds:
PBG ES-1G Custom - "Dave Grohl DG-335 Tribute"
Find me on Facebook!
https://www.facebook.com/brodie.west.9
Posting Permissions
Reply With Quote