good stuff Sam so you must be almost finished clear coats and ready to polish after a long final curing period ?
good stuff Sam so you must be almost finished clear coats and ready to polish after a long final curing period ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
When I can finally get a few coats in a row that i don't pick a lumpy run off. Then it'll be time to let it hang and cure while I prepare the electronics.Originally Posted by wokkaboy
Wondering if there's any reason I shouldn't start installing the shielding after a couple of days curing.
- Sam
IB-5 - was finished, considering re-finishing body
IB-6S - done.
JR-1M - dressing frets and electronics build
ST-1 - still wondering how to install a tremelo
Telebass - non-PBG from parts buiild - painting body
What should I polish the TO with?
I have a thimble of dingo wax still.
Oh, and what is a "long" curing? 2 weeks, 4 weeks, longer?
- Sam
IB-5 - was finished, considering re-finishing body
IB-6S - done.
JR-1M - dressing frets and electronics build
ST-1 - still wondering how to install a tremelo
Telebass - non-PBG from parts buiild - painting body
Reply With Quote
