nice looking body Brodie ! (the SG I mean haha
with the headstock you could draw a line equal offset from the holes and shape the sides so the hole offsets are the same, might be easier than plugging/redrilling the holes. The B peg looks a bit too far off the edge. Bit of sanding should even up the offsets
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Reply With Quote
