some dodgy tips there Pabs!
Not sure about valve tubes with no glass, you would think the glass is there for a reason.
That locking nut install looks like the truss rod socket almost had a flat edge on it he'd sanded so low, be surprised if the truss rod would turn with the locking nut screwed down and the mounting screws were very close to the truss rod socket channel
Last edited by wokkaboy; 04-03-2015 at 09:07 AM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote