yeah cool, suppose the pivots will need to be quite low so the bridge sits flush with the body top.
The clear router plate looks sick as ! I hate how most router plates aren't transparent and you have no idea what the bit is munching up !
yeah cool, suppose the pivots will need to be quite low so the bridge sits flush with the body top.
The clear router plate looks sick as ! I hate how most router plates aren't transparent and you have no idea what the bit is munching up !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Like I say, I'll get a better idea once the bridge gets here, if it's looking like it won't work I'll just use the stock one, no biggie.Originally Posted by wokkaboy
Although the router bases being clear are a definite bonus is wasn't my driving motivation in getting them made up. The simple fact is the one that was on my router had a tiny surface area and would have quite easily tipped into the control cavity given 1/4 of a chance.
These ones are most definitely sick!!
Last edited by bargeloobs; 21-01-2015 at 09:19 AM.
Posting Permissions
