gee the posty has been nice to you over the last few days Barge ! When you place the bridge in the trem route you will see the veneer is covered so all good there.
I'm guessing the templates that Pablo sent are for putting the router over the control cavity to route the binding channel ? You need something solid for the router to rest on
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Clear base plates for your router.
Scott.
Bingo!! Your prize is in the mail:-)Originally Posted by WeirdBits
The most important question though, do they fit?
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
Yeah I think I was panicking over nothing really Wokks. I guess I'll have a better idea what's going on when my new bridge (Mighty Mite) gets here.
Not even sure if it will work yet:P
nice looking bridge Barge, so its a pivot system, hopefully the pivot posts fit in the area between cavities
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Those posts should shit in there Wokks, "should" being the operative word.
@pabs, fit? Only like a bought one:-)
Last edited by bargeloobs; 21-01-2015 at 09:06 AM.
yeah cool, suppose the pivots will need to be quite low so the bridge sits flush with the body top.
The clear router plate looks sick as ! I hate how most router plates aren't transparent and you have no idea what the bit is munching up !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
Like I say, I'll get a better idea once the bridge gets here, if it's looking like it won't work I'll just use the stock one, no biggie.
Although the router bases being clear are a definite bonus is wasn't my driving motivation in getting them made up. The simple fact is the one that was on my router had a tiny surface area and would have quite easily tipped into the control cavity given 1/4 of a chance.
These ones are most definitely sick!!
Last edited by bargeloobs; 21-01-2015 at 09:19 AM.
Posting Permissions
