But it has been shielded, a backing plate made from some pickguard material and has a very bad finish (
forgot a basic thing that I worked out on a sample - raise the grain first, stain, light sand and then stain again.....)
As a result the "white" finish is a bit blotchy and uneven (particularly on the sides).
However the wiring works and it actually sounds "cool" according to my daughter... is is a single coil with a touch more depth.... or a "light" humbucker with a bit more crunch.
For a first build with a scratch body - I'mm rather chuffed..... But the third instalment of this build is already in the planning stages......
Anyway - here's a few photos.....
Originally Posted by EsquireEsque
But it has been shielded, a backing plate made from some pickguard material and has a very bad finish (forgot a basic thing that I worked out on a sample - raise the grain first, stain, light sand and then stain again.....)
Reply With Quote