Hey chaps been at it again picked up a mint Squire Strat just needs a cut and polish and I'm going to upgrade it parts as I always do, rare to pick up any guitar from cashies that i haft to correct it in some way, been working on the SG had a few problems regluing the scarf joint and I notice the finger plate was unglued, so shot up to bunnings to get a stronger glue settled on weld bond which did the trick and reglued all the finger plate, got a pot of timber mate to ill a few spots,

guys who have read my thread from the beginning know I don't like timbermate, as it swells when using lacquer clear it sucks up the thinners swells and messes up a lot of work getting them all flat unfortunately had no choice I gave the whole body 3 coats of binder prior to shooting the colour tint which should isolate it, the pictures I'm about 1/2 way through doing the colour, I've mix it up its a dark red festering in to a reddish brown the pictures don't do it justice, should have him in clear by Monday, I got 4 guitars on the go atm, all the ones I got for myself are finished and play everyone of them every night

Has anyone know anything about Artist guitars Strat Wrangler pick up set any good or crap

Ok heres some pictures
The red arrows are how much the finger board needed gluing



The colour is translucent you see the grain camera dose




Heres the Squire its in pieces atm getting a good cut and polish and clean