Phroz STA-1M, ST-M, TL-1

[fender3x]

Amazing what you can get out of a rattle can. I haven't seen "Supercheap" here in the US...and I've not had good luck with Duplicolor, which is what I can get.

[phrozin]

Amazing what you can get out of a rattle can. I haven't seen "Supercheap" here in the US...and I've not had good luck with Duplicolor, which is what I can get.

sorry fender supercheap is an auto parts store here in Australia its probably the largest, I don't use Duplicolor i think their a rip off, it is harder with rattle can for sure there are 2 ways you can use the most important is the clear theses days I like to use 2pack or acrylic lacquer if your not good with the ins and outs of how to spray paint 2pack use acrylic lacquer. I don't know a lot of brands in the USA but Rust-Oleum is ok but any Acrylic Clear 400g can will do the job, you just got to know a couple of things 1 you always use a sanding block, you spray I 1 full length pass not short burst you go then forwards then backwards overlapping every pass by 25% and most importantly take your time you do 6-8 coats clear, 3 coats primer filler as many as needed sanding after every 2-3 wait 3 day before cut and polishing it, 2pack is a different method anyone one can pm me if they need help

atm I'm using rattle can as I sold my large compressor as I'm buying 1 of those silent compressor, I've just got a little 1 which can't keep with my spray guns I do use it for candies`

link
supercheapauto