Just joined the forum

[Trevor Davies]

Good day all,
I joined the forum to learn and build my bass. Btw it seems I can't add the product to the cart from pitbullguitars.com.
And I wonder if the PBA-4 model can convert to humbucker pickup instead of PB pickup.

Can anyone advise on the above matter? Thank you.

I would assume if you knew what you were doing with a router and template you could use the pickguard to make another without the P pickup hole. Then use a template of the humbucker pickup to cut an appropriate hole in the pickguard, put it in place and then use that as the template to route the body to the correct depth. That's how I would go about it. Or if the humbucker is bigger than the P pickup hole then just use the provided pickguard and cut that etc.

+1 for using templates and a router to change to a humbucker. You may also want to consider changing the pots to 500 K (not 250K). when using a humbucker.

[jella]

+1 for using templates and a router to change to a humbucker. You may also want to consider changing the pots to 500 K (not 250K). when using a humbucker.

Thank you, I will need to wait until the store opens. I hope it will be soon.