My EX1-R Explorer Build

[nathan]

Thanks for the response. In regards to the heel, I take it a should be gluing the neck in with the clamp pressing on the end of the neck where it flattens out at the base?

I took a measurement of the scale between the inside of the nut and the top of the saddle where the string will rest and I'm seeing 625mm. I have some room to play with the intonation screws, but what would normally be done here?

Nathan

[Trevor Davies]

Thanks for the response. In regards to the heel, I take it a should be gluing the neck in with the clamp pressing on the end of the neck where it flattens out at the base?

I took a measurement of the scale between the inside of the nut and the top of the saddle where the string will rest and I'm seeing 625mm. I have some room to play with the intonation screws, but what would normally be done here?

Nathan

We have an overlapping post !

I think the neck should be shifted out of the neck pocket a bit to get the high e 628 mm.