Originally Posted by fender3x
Not yet I haven't, I'll have to keep looking.
I'm going to be running some tests on the crossover using my function generator, and scope, I will be using two 8.2 Ohm/1W metal film resistors to simulate the speaker loads, this is just to check that the crossover works as it's supposed to, 1W metal film resistors will do fine since the signal level coming out of the function generator is only line level, not speaker level and I will using the function generator to input a signal into the crossover, the power level I'm dealing with is not high enough to do any real damage.
Reply With Quote