Was actually thinking about replacing the nut with one of these to match the black hardware: https://graphtech.com/products/black...40103275233303
Do you know if nut angle varies widely on multiscale guitars? The same brand also has a blank to cut your own slots, could go that route. Also I have some deer antlers that could make a pretty good bone nut 🤔 though pre-slotted would be nice to not buy all the tools needed to make and slot a nut.
Sorry, but I cannot help with that question. Hopefully others will pitch in!Originally Posted by altizerc2196
I would also be checking if the width of the nut matches the width at the top of the fretboard (as that would affect the string spacing on the PB neck).
I do know that good quality nut slotting tools are quite expensive - but possibly worth considering if you are intending to do a number of kits. Most nuts will need to slotted to get a good string action.
PitBull Builds: FVB-4, LP-1SS, FBM-1, AG-2, TB-4, SSCM-1, TLA-1,TL-1TB, STA-1HT, DSCM-1 Truckster, ST-1, STA-1, MBM-1, MBM custom, GHR-1 (Resonator), FH-5V (Acoustic), DMS-1 (Mustang).
Scratch Builds: Pine Explorer, Axe Bass, Mr Scary, Scratchy Tele's.
The little voices in my head keep telling me "build more guitars"
Reply With Quote
