Build #1: DTL-1 (American Ash body)

[Simon Barden]

The decal has lifted slightly, so I was planning to visit a hobby shop for some decal fixative. Any other suggestions?

Yes, but it means using another decal. Always put a decal onto a surface that's got some finish on already. a) They aren't designed to stick to a rough surface like wood and b) with clear coat over the top, you'll get a different look to the transparent areas of the decal because they've got a matt wood surface underneath that reflects light in a different way.

[craig747400]

Yes, but it means using another decal. Always put a decal onto a surface that's got some finish on already. a) They aren't designed to stick to a rough surface like wood and b) with clear coat over the top, you'll get a different look to the transparent areas of the decal because they've got a matt wood surface underneath that reflects light in a different way.

Sounds good … I have the ability to sand back the face of the headstock and start that part from scratch, again. *thumbs up*