Build numero three!

[McCreed]

As for radiusing the dots - I did the best I could with grades of sandpaper up to 800.

The lower dot on the 12th fret looks to be sitting a bit proud. May be just the lighting or angle of photo.

I've done a similar scraping method to RnR, then a light touch up with fine grit paper. (in the direction of the grain only)

[Groovyman32]

Thanks for the tips guys.

The lower dot on the 12th fret looks to be sitting a bit proud. May be just the lighting or angle of photo.

Yeah i can see how it looks proud but I think that is the light. The edges of the dots are flush but have a hump to them so you can feel them. I’ll try the razor blade approach to finesse them some more


Sent from my iPhone using Tapatalk