Chaps, I have 'completed ' the build ie it is looking great but a couple of major problems I have to deal with.
Firstly the 3 point bridge seems really high making the action way to high. 3mm at first fret and 11mm at the neck.I think I might have installed the bridge incorrectly but I am not sure. There seemed to be only one way of doing it. The central pin seems way too high so even adjusting the rear pins seems to make not material difference. Any ideas.
Oh and my electrics dont work! Fairly fundamental but first time doing it so one mistake along the line and you are stuffed. I figure I will have to take is apart and start again as I dont know where the mistake is. Any tips?
Reply With Quote