Results 1 to 10 of 54

Thread: First Build - EX4

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #23
    Member Marty's Avatar
    Join Date
    Jul 2020
    Location
    Southampton, UK
    Posts
    31
    Not entirely happy with the paint finish. I do like the black and white, but I can see some marks in the paint, mainly above the pick ups where I had to sand back the previous coat which had runs and an orange peel texture. If i was a perfectionist i'd sand it all back and and start again. But I'm not, and the wife is sick of the sight of sandpaper and rattle cans everywhere.

    Thinking maybe doing a very light spray of black over the white for a speckled sort of finish. Then some lacquer and call it a day.

    Neck isn't bolted on, just slotted it in to see if the the paint coats were going to cause any problems. Its very tight with no wiggle whatsoever.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	dsc_1204.jpg 
Views:	156 
Size:	803.1 KB 
ID:	38864  

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •