Well, here is the body. Obviously not trying for anything fancy, here. But as you can see from the dark areas (glare spot not withstanding), I did not get the finish I want. So a little more sanding and a couple more coats of paint. A new can of Gracey's Clear Coat has been ordered.
Note the large C-clamp. With the set-neck AG, you cannot use the board bolted in place of the neck as shown in the manual p.19, and the output jack hole is in the front, so you can't use the dowel method shown on p.20. A tightly attached C-clamp may give you a handle to manipulate the body. And the dowel stuck thru the pick-up wiring hole allows me to clamp it to something and stand the body on its head while the spray coats dry. Someone may find this useful.
Reply With Quote