Lyn #19 - Single Cut LP Jnr

[robin]

@McCreed
Thanks mate. With all the troubles I had with this one if it had been a set neck it would now be just a wall hanging.

I agree that screw on necks allow numpties like me a fair bit of leeway. I doubt that I will be making a set neck guitar anytime soon.

I'm kinda liking the Gibson scale length too and may try an F type guitar with a G type neck in the future.

[king casey]

I'm kinda liking the Gibson scale length too and may try an F type guitar with a G type neck in the future.

Although they are currently out of stock...
An 'F' style guitar with a 'G' type scale.
https://www.pitbullguitars.com/shop/...itar-kit-copy/
(mine has been the 'go to' since I finished it.)
cheers, Mark.

[fender3x]

Although they are currently out of stock...
An 'F' style guitar with a 'G' type scale.
https://www.pitbullguitars.com/shop/...itar-kit-copy/
(mine has been the 'go to' since I finished it.)
cheers, Mark.

If you don't mind waiting, Adam can probably get just the neck...or add it to one of the other kits. I got a custom neck from him a while back. Took a long time (which he warned me of in advance) but it was worth it. Particularly as the shock wears off looking at the Warmoth prices...

[king casey]

If you don't mind waiting, Adam can probably get just the neck

Down side is that 24" necks are no-where near as common as the 25" ones.
I have a few on my watch-list. Not cheap but (I'm afraid to look) damned sight cheaper than Warmoth.

I'm tempted to at least replace my current 'engineered rosewood' neck with either real rosewood or a maple one.


https://www.ebay.com.au/itm/24inch-G...d/193638592995

https://www.ebay.com.au/itm/unfinish...e/193772003573

https://www.ebay.com.au/itm/24inch-G...r/402139430225

https://www.ebay.com.au/itm/24inch-G...t/203219501868

cheers, Mark