Peavey 410 TX 4X10 Inch Bass Cab

[DrNomis_44]

Sounds like a great project! Have you got any plans for what speakers you will put in?

Not currently, but I'm going to see if I can find replacements that are close-enough to the originals, what would you suggest?

There's a chance that I might be able to salvage the originals and get them working again if the voice-coils haven't all been burnt-out, I checked with my multimeter and got a reading of about 32M Ohms, which is clearly an open-circuit in my book, it should read roughly about 8 Ohms or so.

I'm guessing that it is actually a bass cab for a P.A. system, it has a 3500Hz crossover circuit board in it, but, I can't see why it couldn't be re-purposed for use as part of a bass rig.