DMS-1 - mustang/duo-sonic short scale

[guitalias]

Hi OliSam, I'm making a short scale guitar( http://www.offsetguitars.com/forums/...16360&start=30 ), considering a Pitbull DMS-1 maple neck for the final build. Wonder what is your feedback about the Pitbull neck you have on your kit? thanks

[OliSam]

Hi Guitalias

The neck is just great.


There is a lot of talk of bad "fake rosewood" fretboards. However my experience has been just fine.
I rubbed fretboard wax (it is very hard wax and doesnt melt or move at all) into the fretboard and it feels just great. really.


The back of the neck itself is beaut. i flattened out the c-curve with a sanding block a little and i really like how it turned out. i finished the back of the neck in tru-oil (which i am now a convert to). I'll try and get some close up shots of the fret board and attach them here.

[OliSam]

Hi OliSam, I'm making a short scale guitar( http://www.offsetguitars.com/forums/...16360&start=30 ), considering a Pitbull DMS-1 maple neck for the final build. Wonder what is your feedback about the Pitbull neck you have on your kit? thanks

Ok. So as promised. A few close ups of the neck.
Hope this helps you on your journey.







Sent from my iPhone using Tapatalk