I’ve just double checked the wiring against my travel guitar and it is the same, the only difference being that pickup only had the two wires-bare and insulated. The diagram tone rider emailed to me a while back when they didn’t have this combination on their site. They did say my timing was good as they were just in the process of creating the diagrams, perhaps they have changed the diagram since then. Anyhow, the travel guitar does work.

Resoldering pickup wires hasn’t worked, maybe I should ditch the parts and start over fresh. Btw should there be continuity from the red wire to the back of the pickup (I don’t get any) like I get from the bare wire to the back of the pickup?