Results 1 to 10 of 22

Thread: Finishing pedal enclosures

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Mentor jugglindan's Avatar
    Join Date
    Sep 2019
    Location
    Canberra
    Posts
    1,181
    Press'n'Peel film sounded interesting until I saw the cost! I am definitely going to experiment with toner transfer using the acetone+alcohol mix from various papers first. If that fails totally then I will try the heat-based methods.

    In the ideal world in my head I would get a great transfer from plain white printer paper. As unlikely as that is, I now have a method to easily test it.

    But first, my mantra is "Ohm, finish the tele, Ohm"
    Mantra: No more pedals, must finish BlueyCaster...
    Disclaimer: I haven't done woodwork since high school, and wasn't really paying attention at the time ...

  2. #2
    GAStronomist DrNomis_44's Avatar
    Join Date
    Dec 2014
    Location
    Darwin,NT Australia
    Posts
    5,513
    Quote Originally Posted by jugglindan View Post
    Press'n'Peel film sounded interesting until I saw the cost! I am definitely going to experiment with toner transfer using the acetone+alcohol mix from various papers first. If that fails totally then I will try the heat-based methods.

    In the ideal world in my head I would get a great transfer from plain white printer paper. As unlikely as that is, I now have a method to easily test it.

    But first, my mantra is "Ohm, finish the tele, Ohm"

    Yep, as with everything, you go with whatever works for you, I wouldn't mind giving the acetone+alcohol toner transfer method a go and see how it works for me, in the meantime I usually make do with either vero board or pad-per-hole board for building circuits, I'm in the process of experimenting with using an app called Veecad to do all my board layouts, it's a free bit of software.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •