Little Black Buffer buffer buffer!

[McCreed]

How do you know when a buffer is working?

All your EQ settings are now too bright.

I presume you've done A/B testing. I would imagine "chalk and cheese" comes to mind .

I was bowled over by the difference when I was running my Boost 'n' Buff. A real eye opener.

[jugglindan]

I presume you've done A/B testing. I would imagine "chalk and cheese" comes to mind .

I was bowled over by the difference when I was running my Boost 'n' Buff. A real eye opener.

A/B testing (direct to amp vs through bypassed pedals) is why I built the buffer. But my amp EQ was set for the pedal board and now I am rolling guitar tone back 50%.

Sent from my moto g(7) using Tapatalk

[McCreed]

A/B testing (direct to amp vs through bypassed pedals) is why I built the buffer. But my amp EQ was set for the pedal board and now I am rolling guitar tone back 50%.

Do you reckon your new compressor is adding to that difference?
I know mine adds "sparkle" FLOABW, but it also 3 adjustable parameters Comp, EQ, Volume. (just like the original Diamond)

[jugglindan]

Do you reckon your new compressor is adding to that difference?
I know mine adds "sparkle" FLOABW, but it also 3 adjustable parameters Comp, EQ, Volume. (just like the original Diamond)

It's not the compressor. Too bright with it off. In fact, the compressor warms things up a bit, feels like it is squashing a little too much. I will have to pull out the multimeter to adjust some more. I might try the voltage setting your Greek pedal builder uses.

Sent from my moto g(7) using Tapatalk