My first PB build - ES-1GT with modifications

[Simon Barden]

They'll do the job. Decent pots. 6mm is compatible with the kit holes and the kit knobs.

That guitar isn't finished properly yet. Neck is only half done, needs attaching and final clear coats sprayed on, then sanding and polishing. Binding got ruined by spirit-based stain in the cracks, so it was painted white and then some tinted lacquer has given it a more aged look.

[king casey]

That guitar isn't finished properly yet. Neck is only half done, needs attaching

Problem solved.

cheers Mark.

[Simon Barden]

Problem solved.

cheers Mark.

Except it's at Jim C's house (or maybe even his workshop), so at least 40 miles away and unobtainable at the moment with the travel restrictions.

[glenwilliam]

problem solved.

Cheers mark.

Hahah