My first PB build - ES-1GT with modifications

[Joe Garfield]

These are the push/pull switches I ordered. It looks like they would fit depth-wise but IDK if the shaft would be long enough. It’s 9.5mm shaft but you have to subtract for the nut. They are 44.5mm total height so some would have to be started through the hole at an angle, which is likely going to happen anyway when you pull them through with string. Mounting depth is only 25.4mm.

https://www.mojotone.com/guitar-part...-Potentiometer

Here is long shaft version, but 19mm shaft adds 10mm to total height and would be more difficult to snake through the holes at an angle.

https://www.mojotone.com/guitar-part...-Potentiometer

I think if you used the long shaft version (54.5mm total height) you could squeeze them into the Neck Vol and Neck Tone per Simon’s measurements and layout. Note that it is perfectly OK to control bridge pickup with a switch hidden under neck pickup’s knob.