The Deluxester Prototype - Sonic's foray into repeatable scratch builds

[McCreed]

I'm really not much of a woodworker. I've messed around with it plenty, but usually utilitarian stuff, never really to build nice objects.

Hah! Sounds like we went to the same school - Utilitarian University!

[Sonic Mountain]

Hah! Sounds like we went to the same school - Utilitarian University!

Heh, yeah it's been interesting moving into this hobby and learning a bit more about it. A lot of woodworkers would probably be horrified at some of my methods.

Carve basically done. I'm essentially up to where I'd be if I'd bought this as a kit. As I move through the sanding grades I'll refine a few areas, but overall really happy. I think its better than the previous one. Its skinnier anyway. That said, the neck on the Deluxester has really grown on me, I did set out to build a big assed neck and that's exactly what I got. I think this one is a little more refined.




Neck temporarily attached. I'll go with the same ferrules as the last one.



Comparison with the Deluxster (ignore broken string.. its getting played a lot )

So this really illustrates the new scaling approach. I'm much happier with the current build proportions, and its an evolution of the Deluxster v2.0, the main difference being the bout being a little larger. It's not a huge change, but that extra meat in that area makes it look more balanced in person. It's kind of been understated in photos due to perspective. Looking forward to building the new one in the not too distant future.



Which brings me to a discussion regarding sharing of the Deluxester designs. A few people have said they'd like one (Frankenwalshie and Woltz I know are keen, so pipe up if you are interested as well) as a way of giving back to the community I'm pretty happy to do this, but I'm not sure the best way to go about it. Obviously, my goal is to be making and selling these things, so I don't exactly want to shoot myself in the foot by giving it away before I've even really started.

So I'm thinking there are a couple of ways to go about it:

1. I supply the design files, to scale, and you can print them out and make the guitar from that as I have been with this guitar. For a one off knocking up some mdf templates should be pretty straight forward for the scratch builders on here. I probably wouldn't charge for this option, but as below would ask that its used for personal builds and that I'm acknowledged as the designer.

2. I get templates cut and you guys purchase them from me (for a nominal cost to cover manufacture, shipping and a design fee)

3. You guys supply me with timber and your desired layout and I route the body and make a neck to the point of carving and send it back to you guys to complete however you like. This would keep all the design and templates in my hands, but there is quite a bit of time involved in getting to that point in a build, even with materials provided, so I'd need to work out what that is worth. I'd say it might end up being the pmore expensive option.

With any of the above options my main proviso is that you acknowledge that they are my designs and don't manufacture them for profit. I'd also think that in any sharing of the build that Pitbull guitars is mentioned as being a big part of how it came to be. So you could for instance brand it as a Deluxster by Frankenlab or whatever.

Anyway, what are peoples thoughts on these approaches? I never could have gotten to this point without this community so I'm more than happy to give back a bit, but just want to do it in a sensible way.

Another option might be to talk to Adam about getting them manufactured as kits if there is enough interest. That's no small undertaking, but I think it could be done if Pitbull are keen. I haven't run this by him in any way, so expressing interest for that option here might make the case for at least starting a discussion about it.