Welcome samatizer!
Great advice from FrankenWashie too.
The only thing I'll add re: the pickup wire hole is that it shouldn't require drilling all the way through to the control cavity.
Just drill as near to the bottom of the pickup route as you can get, and just far enough that the bit it intersects the existing hole.
Depending on your level of experience, trying to drill a fresh hole all the way through can end in tears if you miss the cavity!
Making the world a better place; one guitar at a time...
That's a good point McCreed, you'd just need to be 100% sure you can clear all the shavings and fragments.Originally Posted by McCreed
Welcome samatizer!
Great advice from FrankenWashie too.
The only thing I'll add re: the pickup wire hole is that it shouldn't require drilling all the way through to the control cavity.
Just drill as near to the bottom of the pickup route as you can get, and just far enough that the bit it intersects the existing hole.
Depending on your level of experience, trying to drill a fresh hole all the way through can end in tears if you miss the cavity!
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Posting Permissions
Reply With Quote