First Build - AES-1 AHAHAHAHA

[Simon Barden]

You can easily fit (and remove) the two E tuners (you don't need any more that that to check alignment), just don't drill the hole for the anti-rotation screw yet. The tuners screw in place from the top, so doing the nuts up reasonably tight will keep them in place well enough to run some string between the headstock and the bridge.

[Scramblermatt]

You can easily fit (and remove) the two E tuners (you don't need any more that that to check alignment), just don't drill the hole for the anti-rotation screw yet. The tuners screw in place from the top, so doing the nuts up reasonably tight will keep them in place well enough to run some string between the headstock and the bridge.

Haha as soon as I read this I realised I knew that!!! I think I’m getting a little nervous about starting and over thinking everything! Thanks for your patience though!