Cheers man, it was always my intent to make something classic but still different, there are bits from lots of different guitars combined.

So while waiting to apply another clear coat I'm turning my attention to electrics....

*Paging Dr Weirdbits, Dr Weirdbits to the OR*

I'm really making this bit up as I go. I have room for 2 pots and a 3 way switch. I have on hand a push pull A500K vol pot and a normal B500K tone pot, 22uf Orange Drop cap and a suitable jack on the way.

Looking at my 'Wish' pickups, it looks like adding in a split should be straight forward enough. So I'm thinking master vol and tone with the bridge setup to split. I've had a couple of goes at 'virtually' wiring this and I'm not sure I'm going about it the right way...

Open to alternative suggestions as well - this is the core diagram I have if anyone would like to have a go....



And what I'm looking at out of the pickups