Rolf's TL-1A

[RocknRolf]

Thank you for all suggestions, another obstacle out of the way.
As you can see in the picture (the white curl), the Expoy with filler formed a nice plastic like substance. Screw size 2.4mm, Pilot drill used 2mm. I tapped the screws in nice and slow without a problem. I must say, I do like wood better to screw into, but this was so much easier and is strong enough for the pickup to hold.

[JimC]

As you can see in the picture (the white curl), the Expoy with filler formed a nice plastic like substance.

Good job. The filler choice really is key with this epoxy work, the extent to which it changes the end result is hard to believe until you experience it. I shall try and remember to make some test pieces to experiment with layup and screws next time I mix a batch of epoxy.