Final sand of sealer and removed the masking to see what I need to do to the binding. Most the mess came off with scraping (the edge was not as tight apparently as I thought. But here’s also some staining as the binding has tiny crack in it apparently. I didn’t want to use thinners on this as it would melt the plastic but a little diluted nail varnish might be the answer. If not I can live with it. It’s one of those things.
Next remasters and get the satin clearcoats on the back sides and neck. This will probably be Monday now.
Sent from my iPhone using Tapatalk
Reply With Quote
Originally Posted by Bakersdozen
one of the top unmasked. Before I scraped the binding. You can see where we had leaks. It’s a good job the top is going to be painted. 
