Mark's JTL-1 TeleMaster / JazzMaster

[Bakersdozen]

Am I seeing things or did you balance the body on a spray can for the ferrule drilling?

You are correct. The drill press table is too small to hold an entire body, so I needed the spray can to balance the rear end. I made sure it was all level as you can see the spirit level on top. Plus I clamped the body to the DP table for extra insurance.

[FrankenWashie]

You are correct. The drill press table is too small to hold an entire body, so I needed the spray can to balance the rear end. I made sure it was all level as you can see the spirit level on top. Plus I clamped the body to the DP table for extra insurance.

That's what i thought. You do what you gotta do and if it works, all good. I have been on the receiving end of it not working more times than i care to remember.

[king casey]

I needed the spray can to balance the rear end.

Therefore Cabot's Exterior Gloss is quite stable in more ways than one.

cheers, Mark.

[Bakersdozen]

Therefore Cabot's Exterior Gloss is quite stable in more ways than one.

cheers, Mark.

Hahahaha touché Mr Casey, touché.