TLA-1 First Build

[wazkelly]

Neck and strings are in and I have a problem. Neck angle is not right. Even with a concave bow, strings are touching the 22nd fret. I could try to raise the saddles very high to make up for it but it doesn't sound like the correct fix. Should I shim the neck or should I shave the neck pocket at the correct angle (sounds hard to do)? Any body here had to deal with that?

If you are already touching at 22nd fret a shim only raises the fretboard even higher so that probably won't work.
On both my Tele's i had to sand down between 5mm to 7mm in the neck pocket on both to make them playable.
Best to check measure height on a similar store bought guitar to act as a reference point.

Sent from my SM-A520F using Tapatalk

[Simon Barden]

If you are already touching at 22nd fret a shim only raises the fretboard even higher so that probably won't work.

A neck pocket has two ends, Waz, so you simply put the shim at the headstock end of the pocket to lower the angle.