How did the razor blade treatment go? I usually sand the dots but it takes f o r e v e r!
How did the razor blade treatment go? I usually sand the dots but it takes f o r e v e r!
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Well... the shaving razor blades were too lightweight to shave back the dots but worked ok for burnishing the fretboard. Stanley knife blade was too harsh, what worked best was a blade from a smaller craft knife this kind of styleOriginally Posted by Andy40
Some very careful filing also helped with the higher dots...
Sent from my iPad using Tapatalk Pro
Current Projects
#Planning 5 String Bass
Posting Permissions
Reply With Quote