Woltz's TLA-1Q

[wazkelly]

I did mine with 80 & 120 grit sandpaper as you are only taking off the square edges which shouldn't affect the thickness which is usually around 38mm?

Sent from my SM-A520F using Tapatalk

[Woltz]

I did mine with 80 & 120 grit sandpaper as you are only taking off the square edges which shouldn't affect the thickness which is usually around 38mm?

Sent from my SM-A520F using Tapatalk

I've removed the old binding already so I have the empty binding channel that I'll need to get rid of. If the old binding was still there I could've probably done the roundover on the top of the old binding as you suggested. But it shouldn't be too much of an issue if I'm going to glue on a new top.