JM-1 The King's 2nd PitBull build

[Dedman]

Thanks but, quantity doesn't always mean quality. Lots of better builders than me here.

[Sonic Mountain]

Thanks but, quantity doesn't always mean quality. Lots of better builders than me here.

Yeah but no-one has your style man.

[king casey]

Yeah but no-one has your style man.

Yep, and of course everybody has their perspective

and simples

Reading me like a book.
Like my previous build, I was kind of aiming at something which would come of the Fender production line....
..if they'd be so inclined.
So fairly straight forward and nothing too far out of reach in regards to skill required.

cheers, Mark.

[king casey]

Finished the pointy end



cheers, Mark.

[Shambrick]

Finished the pointy end



cheers, Mark.

Hi Mark, I like your logo. I see you designed it yourself - did you source it from a supplier or print it yourself? I need to source one and Rothko Frost have let me down.

[king casey]

Hi Mark, I like your logo. I see you designed it yourself - did you source it from a supplier or print it yourself? I need to source one and Rothko Frost have let me down.

Hi Shambrick. Yes, I do them myself.
There was a tutorial on how to do transfers somewhere.
Not a lot to it.
I got some transparent laser decal paper. in A4 size.
I'm using Abobe Illustrator.
Reverse the image so you can paint the silver part on the back within the edge of the lettering.
Print the image on A4 paper first and then cut the amount of decal paper to cover it.
Print it again and then paint in the silver (or whatever colour)
Apply the decal right side up.

cheers, Mark.

[Shambrick]

Hi Shambrick. Yes, I do them myself.
There was a tutorial on how to do transfers somewhere.
Not a lot to it.
I got some transparent laser decal paper. in A4 size.
I'm using Abobe Illustrator.
Reverse the image so you can paint the silver part on the back within the edge of the lettering.
Print the image on A4 paper first and then cut the amount of decal paper to cover it.
Print it again and then paint in the silver (or whatever colour)
Apply the decal right side up.

cheers, Mark.

Thanks Mark, will look ito it