Quote Originally Posted by kuanjb View Post
Decided to stain the neck and body black / grey. Trying out Prooftint which is a spirit based stain. Mixed 1 part stain to 2 parts metho. Turned out not too bad but it might be a bit dark.

Unfortunately I found a few glue marks on the body. I had found them earlier and tried to sand them back and also tried some orange oil based cleaner but it seems I didn't do enough as the stain didn't absorb as much in those locations.

Sent from my LG-H930 using Tapatalk
The best thing to do is grab some glue remover, like goof off and spot treat the really noticeable bits. You’ll want to go easy starting out, until you see how things are going to react. It may be that you will need to give the really troublesome spots extra attention, or use a small headed, clean wire brush to scrub the bad bits.
This may take your colour out, and you’ll probably need to reapply across these areas to get colour consistency back afterwards.


Sent from my iPad using Tapatalk Pro