Build 1 - Shoegazer MK1 JMA-1
Build 2 - The Relliecaster TL-1
Build 3 - The Black Cherry SG AG-1
Build 4 - The Sonicaster TL-1ish
Build 5 - The Steampunker Bass YB-4
Build 6 - The Howling Gowing ST-1
"What I lack in talent I make up for with enthusiasm"
have a look in the Shred section Phroz. I just ordered a WL-1 without the floyd....it won't look much like a WL when I finish with it.
I'd love to see your paint on some of those shapes like the Ic, the WL and the BC. Of course you could always go low end....a bass?
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
Firebird shape might work as not as elongated as an explorer and quite well balanced when played sitting down.
# 1 - EX-5 https://goo.gl/fQJMqh
# 2 - EX-1 https://goo.gl/KSY9W9
# 3 - Non PBG Tele https://goo.gl/W14G5g
# 4 - Non PBG J Bass https://goo.gl/FbBaFy
# 5 - TL-1AR GOTM Aug 2017 https://goo.gl/sUh14s
# 6 - MMB-4 Runner-up GOTM Oct 2018https://goo.gl/gvrPkp
# 7 - ES-1 Runner-up GOTM Aug 2018https://goo.gl/T9BEY8
Real ones are heavy though, and need a special stand (as does an explorer, though not so heavy), so probably less convenient for Phroz.
100% Simon right on the money, i mainly do them for myself or close mates and being in a wheelchair its a struggle to hold it and if the body is heavy (arla les paul) its a struggle to just hold it let alone play it, i have been thinking about doing some hollow body's but not quite sure which, having a room full of guitars isn't a problem as i play them all and none sound or play the same, i'm in the middle of a Lpaul for a friend so ill be ordering a couple of kits soon but won't be strat family.I have a few different finishes i want to try, SG is a candidate my missus used to play an EX which she loved. leave it with me and i might surprise every one. thanx for the input guys food for thought ....
hi guys couple i'm currently doing only just up to the clear stage but coming along nicely front is just a yellow dye rear and sides is walnut stain body was a nightmare high and low spots around the binding, i had to clear and sand back with 600 grit 6 times almost used 2lt of clear each block was 9 coats but looking nice a flat now so should polish up real nice still have heaps of work to do on it not sure if its a keeper till i finish it and have a pick
![]()
Last edited by phrozin; 09-08-2018 at 01:24 AM.
Last edited by phrozin; 09-08-2018 at 01:27 AM.
We can always rely on you to set the bar, gorgeous work!
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1