A TB-4 Build whilst a BG-46 dries.

[ozzbike]

Hi Ozzie, have a look at this thread as I have already done what you are contemplating on my EX-5. Suggest you also grab a LP style 3 way switch and run master volume & master tone as that will be much easier to work with.

http://www.buildyourownguitar.com.au...t=4257&page=13
http://www.buildyourownguitar.com.au...ead.php?t=6476

Cheers, Waz

Thanks mate.....saw them. But what goes to the three normal lugs on the pot? Do I still earth the one lug to the base of the pot? Do I need to earth from the back of each pot to the other?

If somebody has a diagram like a normal wiring diagram I would be eternally grateful.

[wazkelly]

Thanks mate.....saw them. But what goes to the three normal lugs on the pot? Do I still earth the one lug to the base of the pot? Do I need to earth from the back of each pot to the other?

If somebody has a diagram like a normal wiring diagram I would be eternally grateful.

Brain dead after a big day doing yard & housework.

Could open up the control cavity tomorrow night and post a photo. From memory the three lugs are wired up the same. You coumd always Google how to wire push pull pots and see what they come up with?

Sent from my SM-A520F using Tapatalk