Hey Sonic,
its a pretty common problem tuner holes not aligning perfectly. Get some 9 or 10mm dowel and glue in the tuner holes, let it dry, cut off and sand and re-drill the tuner holes. If you have access to a drill press makes the job easier.
The holes are 9.5mm so you may need to sand down 10mm dowel a touch
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote