What tools would i get away with making a neck? I have a jigsaw, dremel, power drill and thats it really
What tools would i get away with making a neck? I have a jigsaw, dremel, power drill and thats it really
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
You'd want to have access to a good bench plane and a router. Maybe a spokeshave and Shinto rasp for shaping.Originally Posted by Andy40
It really is going to depend on which way you want to go, single plank neck like a Fender, or a laminated scarf joint like an ibanez or a Gibbo. Accuracy and squareness are critical so you really need to measure three times and cut/plane once.
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Posting Permissions
Reply With Quote