Kick mate i see what everyone is saying, if it was me i would clear it with 3 or 4 coats then use a black on glue if needed that way you will protect the lovely quilt top and gives you a bit of wiggle room, if you dont like the black and doing the edge with a rattle can can be a real pain in the ass with over spray and can sand off over spray with a bit of 2000w&d the center line not sure what you can do there as the red dye wont soak up so you need to put the red dye with a small brush and not wiping it off as WAZ said. Think you have done a excellent job on the dye and ink and will look amazing when its cleared