SG-2 by Nitroburner1000

[Dan]

To get the bushings out, drop a small screw (upside down) or something down in the bushing then screw the post into the bushing. It'll lift right out.

Then strip the end of the earth wire, poke it through so that there's 1.5cm or so in the hole and put the bushing back in.

[nitroburner1000]

To get the bushings out, drop a small screw (upside down) or something down in the bushing then screw the post into the bushing. It'll lift right out.

Then strip the end of the earth wire, poke it through so that there's 1.5cm or so in the hole and put the bushing back in.

Awesome, thanks Dan.