NON-PBG - LP Build Diary for DIY Guitars GLP-40BBK

[Simon Barden]

You may need to add in just a touch of neck relief to get rid of all the buzzes (truss-rod slightly anti-clockwise), but see how the bridge height adjustment goes first. Also, if you measured the neck relief immediately after adjusting the truss-rod, you will probably want to go back and check that after it's been sitting there under normal string tension for a day, as it can take time for a neck to fully settle. You may need another small tweak to get it right.

[Alkay]

You may need to add in just a touch of neck relief to get rid of all the buzzes (truss-rod slightly anti-clockwise), but see how the bridge height adjustment goes first. Also, if you measured the neck relief immediately after adjusting the truss-rod, you will probably want to go back and check that after it's been sitting there under normal string tension for a day, as it can take time for a neck to fully settle. You may need another small tweak to get it right.

Hi Simon thanks for that. I'll give it a go tomorrow and see how I go.

bit late here to put on the amp with testing. I might annoy a few humans trying to sleep.

cheers and I'll give an update tomorrow if all goes well.,

Alkay