Hi Alkay, if the TO is fairly flat then skip the wet sanding. If it needs a bit of levelling then I would give it a light 2000 grit wet sand before the micro mesh pads
Hi Alkay, if the TO is fairly flat then skip the wet sanding. If it needs a bit of levelling then I would give it a light 2000 grit wet sand before the micro mesh pads
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Thanks wokkaboy,Originally Posted by wokkaboy
There's definitely some unsightly bumps on the body and the neck. Hopefully the 2000 wet sand will level those bumps out.
Cheers,
Alkay.
Reply With Quote
